Control GX7010C PXI trigger lines

Lennart H.
Braunschweig,

Jan 13, 2020
1 Post

0 ✔  |  ✗ 0  

Control GX7010C PXI trigger lines

Dear Support Team,

we are using a GX7010C chassis to control 8 cp246 cards (kinetic systems). To start/stop data acquisition on all cards simultaneously they need an external trigger signal on PXI trigger lines:
"To start an acquisition, use the PXI Controller to apply a pulse on PXI Trigger Line 1. This should start all the CP246 acquiring data.
To stop an acquisition, use the PXI Controller to apply a pulse on PXI Trigger Line 2. This should halt the acquisition process."

How can I use the GX7010C chassis to generate a software controlled pulse on PXI trigger line 1 by using LabView? I didn't found such a function in the GXChassis.llb LabView libary.
(C:\Program Files (x86)\Marvin Test Solutions\GxChassis\GXChassis.llb)

How can I configure the chassis, so that it generates a time delayed  pulse on PXI trigger line 2? The delay between pulse 1 and 2 should be set by LabView.


Please Note
You need to have a M@GIC account to participate in the Forums.
Not yet registered on our website? Click here to register today!

All content, information and opinions presented on the Marvin Test Solutions User Forums are those of the authors of the posts and messages and not Marvin Test Solutions'. All attachments and files are downloaded at your own risk. [Read More]