ATEASY serial com functions

Raz A.
Haifa,

Jan 19, 2022
82 Posts

0 ✔  |  ✗ 0  

Re: ATEASY serial com functions

I am using ATEASY 7 142G

I have serial com port that is connected to the UUT (at baud rate 921600)
The UUT send data non stop

when i do the following scenarion the Comflash(in) or ComClose get stuck-

1.open the relevant com
2. turn on the UUT
3. flush(in) gets stuck
4. if i replace the flush with Comclose, it also get stuck

why?

Raz A.
Haifa,

Jan 19, 2022
82 Posts

0 ✔  |  ✗ 0  

Re: ATEASY serial com functions

when i forcibly close the UUT, the flush or close functions releases.....

Solution Available
DrATEasy (Ron Y.)
Mission Viejo, CA

Jan 19, 2022
371 Posts

1 ✔  |  ✗ 0  

Re: ATEASY serial com functions

Take a look at this thread. https://stackoverflow.com/questions/7208094/force-a-com-port-to-close I've seen it in the past, you may want to disable the driver if associated with this device from device manager. Usually it is "Microsoft Serial Ballpoint".

Ronnie



Please Note
You need to have a M@GIC account to participate in the Forums.
Not yet registered on our website? Click here to register today!

All content, information and opinions presented on the Marvin Test Solutions User Forums are those of the authors of the posts and messages and not Marvin Test Solutions'. All attachments and files are downloaded at your own risk. [Read More]