Description
Combining the low power/high performance features of Intel’s Mobile Pentium M processor with the 855GME chipset, the GX7920 CompactPCI system controller offers a high performance, single slot, PXI controller solution. When installed in a GX7000 or GX7100 chassis, the 6U controller provides an integrated, high performance, single slot, PXI controller solution – supporting all integrated chassis peripherals (hard drive, DVD, etc.) and providing a variety of I/O interfaces including USB, Gigabit Ethernet, and RS232. Additional flexibility is provided by the front panel accessible PMC slot, which can accommodate a variety of interfaces and functions for specific applications or needs.
Features
The GX7920 employs the Intel Pentium M processor and offers equivalent performance to a 2.6 GHz Pentium 4 with half the power consumption. ECC memory is fast and reliable and up to 2GB of PC333 DDR SDRAM via two 200-pin SODIMM sockets can be installed on the module. The highly integrated GX7920 features a PCI-X PMC site, And the Intel 6300ESB I/O Controller Hub provides advanced I/O technology including USB 2.0 (40X faster than USB 1.1), Serial ATA150 and an onboard 64/66 PCI-X bus. Up to 4 Gigabit Ethernet ports (2 ports at the front and 2 at the rear) provide full PICMG 2.16 support.
The GX7920 features full rear I/O connectivity as well as front panel status LEDs that provide debug and diagnostic information.
Applications
- GX70xx PXI chassis
- GX71xx PXI chassis
GX7920P Series Specifications
Processor and Memory |
---|
Processor | Mobile low power Intel Pentium M processor in Micro-FCBGA 479-pin package, 2x 32KB L1 cache and 1MByte/2MByte L2 cache, 400MHz processor system bus |
Low Power dissipation | 1.4GHz LV (2 MByte L2) |
Memory | - 400MHz processor side bus, Intel 82855GME
- Up to 2 GB PC333 DDR SDRAM w/ or w/o ECC via two
- 200-pin SODIMM sockets (supplied with 1 GB)
- Socket for CompactFlash Type II module
- Connector for onboard 2.5” HDD support
- 1 MB Firmware Hub (FWH) for BIOS
- 8 kB for storing CMOS data when operating without battery
|
I/O |
---|
- Two 16C550 compatible UARTs (COM1/2)
- Keyboard on rear and onboard connector and mouse interface on rear
- Floppy disk controller on rear
- Four USB 2.0 interfaces with up to 480 Mbit/sec, two front, two rear
- Two 10/100/1000 MB/s Gigabit Ethernet ports (front panel)
- VGA Video Controller integrated in Intelfi 82855GME GMCH providing 2048x1536x8bit/60Hz resolution, max.shared memory 64MB
|
Front Panel Functions |
---|
COM1 | 9-pin D-Sub (RS232, RS422, RS485) |
VGA | 15-pin D-Sub SVGA connector |
Ethernet | 2x RJ-45 |
USB | 2x 4-pin connectors |
Pmc Interface | Front panel accessible |
Leds | 2x LAN activity (yellow) and speed (green) one blue control LED for hot swap 2x for IPMI, 1x watchdog, 1x thermal control 8-LED-field for BIOS POST code or general purpose |
Reset | Reset button, guarded |
Micro Switch | For hot swap (not supported in GX7100 and GX7000 chassis) |
Onboard Interfaces |
---|
- Two IDE connectors supporting Ultra DMA: one 40pin/2.54mm, one 44 pin/2mm for onboard 2.5 IDE HDD or Flash
- One SATA connection (optional), can be used alternatively to connect an onboard 2.5” SATA HDD instead of an onboard 2.5” IDE HDD
- CompactFlash type II socket
- 22-pin connector with all LPC signals
- 2x200-pin SODIMM connectors
|
I/O Summary |
---|
| Front I/O | Rear I/O | Onboard Conector |
---|
Video | 1 | 1 | - | USB | 2 | 2 | - | Serial | 1 | 2 | - | PS/2 Mouse | - | 1 | - | PS/2 Keyboard | - | 1 | 1 | Ethernet | 2 | 2 | - | ATA 100 | - | 1 | 2 | SATA 150 | - | 2 | 1 | CompactFlash | - | - | 1 | PMC | 1 | via J4 | Pn1-Pn4 | Floppy | - | 1 | - |
|
CompactPCI Bus Interface |
---|
PICMG 2.0 Rev. 3.0 compatible, 32 bit/33 MHz. 5V default signaling (3.3V on request available), REQ/GNT for 7 slots Operating in system slot as system master and in peripheral slot in PCI passive mode (no communication to Compact- PCI bus). |
PMC Slot |
---|
2x LAN activity (yellow) and speed (green) one blue control LED for hot swap 2x for IPMI, 1x watchdog, 1x thermal control 8-LED-field for BIOS POST code or general purpose |
Supervisory Functions, Clock/Calendar |
---|
Watchdog, software configurable, 125 msec to 256 sec generates IRQ, NMI or hardware reset. Hardware monitor LM87 for thermal control, fan speed and all onboard voltages. RTC (integrated in HanceRapids) and CMOS RAM with backup, battery replaceable. |
Rear I/O via J3/(J4)/J5 |
---|
J3 | PICMG 2.16, VGA, COM0/1, keyboard, mouse, USB3/4 |
J4 | PMC rear I/O |
J5 | SATA 1/2, IDE (secondary), Floppy |
IPMI |
---|
IPMI 1.5-compliant for IPMI based management and CompactPCI System Management PICMG 2.9 R1.0. |
Compliance |
---|
CompactPCI Core Specification PICMG 2.0 Rev. 3.0 CompactPCI Hot Swap Specification PICMG 2.1 R2.0 CompactPCI System Management PICMG 2.9 R1.0 CompactPCI Packet Switching Backplane PICMG 2.16 R1.0 Designed to meet or exceed: - Safety: UL 1950, UL 94, CSA 22.2 No 950, EN 60950, IEC 950 - EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2 |
General |
---|
Dimensions | 233 x 160 x 20.5 mm, 6U, 4HP |
Weight | 350 g |
MTBF | 139.589 h @ 30 C / 86 F (Bellcore Issue 6) |
Software Support |
---|
AMI BIOS with POST codes, setup console redirection to serial port (VT100 mode) with CMOS setup access, BIOS parameters saved in EEPROM, diskless, keyboardless, videoless operation LAN boot support. Board identification number accessible via EEPROM Support for Windows 2000, XP, XP Embedded, Windows Server 2003 |
|
Power Consumption |
---|
3.3 V | Typ. 8-10 W / max. 11 W |
5 V | Typ. 5-7 W / max. 11 W |
+12 V | Required |
-12 V | Not required |
Environmental |
---|
Operating Temp. | 0oC to +60oC standard-40oC to +85oC E2 with 1.1/1.4GHz LV Pentium M (optional) |
Storage Temp. | -55oC to +95oC |
Climatic Humidity | Non condensing 93% at 40 C (acc. to IEC 60068-2-78) |
Altitude | 50,000 ft. (15,240 m) |
Note: Specifications are subject to change without notice.
Downloads for GX7920P Series
GX7920PDS.pdf
May 19, 2009
438.12 KB
Download our PXI Catalog
Order GX7920P Series and Related Products
To order call
1-888-837-8297
or order on-line via the form below. Prices are specified for
USA
destination orders. Prices are noted in USD.
Import duties, taxes, and charges are not included in the item price.